Cx Series Operator’s Manual Service - 95
Procedures
Hydraulic Hoses
Check for leaks where shown before startup and
every 10 hours.
Pressurized fluid or air. Injection can cause death or
serious injury. Refer to operator’s manual for correct use.
To help avoid injury:
• Use a piece of cardboard or wood, rather than hands, to check for leaks.
• Before disconnecting a hydraulic line, turn engine off and operate all controls to relieve pressure.
• Lower, block, or support any raised component with a hoist.
• Cover connection with heavy cloth and loosen connector nut slightly to relieve residual pressure.
Catch all fluid in a container.
• Before using system, check that all connections are tight and all lines are undamaged.
• If you are injured, seek immediate medical attention from a doctor familiar with this type of injury.
To Next Page
Loading...
Need help?
General
