Ditch Witch JT920 - Page 106

106 JT920/JT920L - OPERATION
ASSEMBLE BACKREAM STRING
106 JT920/JT920L - OPERATION
ASSEMBLE BACKREAM STRING
3. Tighten joint using scribe line technique to achieve proper
preload.
4. Turn screw opposite way two turns to relieve pressure and
remove quick wrench components.
5. Hand tighten EZ-Connect pin to pin-to-pin adapter.
6. Attach quick wrench in join position.
7. Tighten joint using scribe line technique to achieve proper
preload.
8. Turn screw opposite way two turns to relieve pressure and
remove quick wrench components.
3. Tighten joint using scribe line technique to achieve proper
preload.
4. Turn screw opposite way two turns to relieve pressure and
remove quick wrench components.
5. Hand tighten EZ-Connect pin to pin-to-pin adapter.
6. Attach quick wrench in join position.
7. Tighten joint using scribe line technique to achieve proper
preload.
8. Turn screw opposite way two turns to relieve pressure and
remove quick wrench components.