Ditch Witch JT920 - Remove Pullback Device

114 JT920/JT920L - OPERATION
REMOVE PULLBACK DEVICE
114 JT920/JT920L - OPERATION
REMOVE PULLBACK DEVICE
REMOVE PULLBACK DEVICE
The pullback device can be removed when the last pipe is on the
frame.
It can be removed when a target pit along the bore path has been
reached. Remaining pipe is then pulled back and removed.
Reverse steps outlined in “Attaching Pullback Device” to remove
pullback device.
REMOVE PULLBACK DEVICE
The pullback device can be removed when the last pipe is on the
frame.
It can be removed when a target pit along the bore path has been
reached. Remaining pipe is then pulled back and removed.
Reverse steps outlined in “Attaching Pullback Device” to remove
pullback device.