Ditch Witch JT920 - Drill Auxiliary and Remote Controls

18 JT920/JT920L - CONTROLS
DRILL OVERVIEW
18 JT920/JT920L - CONTROLS
DRILL OVERVIEW
Auxiliary Wrench Switch
This switch controls auxiliary
(back-up) breakout wrench.
• Press top to lock wrench onto
pipe flats.
• Press bottom to release pipe.
Fluid Source Selector Switch
This switch selects fluid source.
• Press top to use remote fluid
system.
• Press bottom to use on-board
fluid system.
Remote Start Switch
This button starts remote fluid unit
from drilling unit.
• Push switch.
• Release when engine starts.
This button only works when
ignition switch on fluid unit is on.
ic1327a.eps
ic0048c.eps
ic1272a.eps
Auxiliary Wrench Switch
This switch controls auxiliary
(back-up) breakout wrench.
• Press top to lock wrench onto
pipe flats.
• Press bottom to release pipe.
Fluid Source Selector Switch
This switch selects fluid source.
• Press top to use remote fluid
system.
• Press bottom to use on-board
fluid system.
Remote Start Switch
This button starts remote fluid unit
from drilling unit.
• Push switch.
• Release when engine starts.
This button only works when
ignition switch on fluid unit is on.
ic1327a.eps
ic0048c.eps
ic1272a.eps