ST37x Operator’s Manual Specifications - 99
ST37x
Specifications are called out according to SAE recommended practices. Specifications are general and subject to change without
notice. If exact measurements are required, equipment should be weighed and measured. Due to selected options, delivered
equipment may not necessarily match that shown.
Hydraulic System U.S. Metric
Auxiliary: double gear pump
Combined flow rate 13.9 gpm 52.7 L/min
Pressure 3625 psi 250 bar
Chain speed 369 fpm 112 m/min
Ground drive: dual hydrostat
Flow rate 15 gpm 56.8 L/min
Pressure 3625 psi 250 bar
Fluid Capacities U.S. Metric
Fuel tank 10.5 gal 40 L
Engine oil, with filter 5.0 qt 4.7 L
Hydraulic reservoir 9.2 gal 35 L
Coolant capacity 1.28 gal 4.8 L
Battery
SAE reserve capacity 110 min, SAE cold crank @ 0°F (-18°C) 800 amp, 12V electrical system
Noise Levels
Operator 89 dBA sound pressure per ISO 6394
Exterior 103 dBA sound power per ISO 6393
Vibration Level
Average vibration transmitted to the operator’s hand/arm during normal operation is 2.51 m/sec
2
.
Average vibration transmitted to the whole body during normal operation is 1.11 m/sec
2
.
To Next Page
Loading...
Need help?
General
