Why is my DITTING Grinder not grinding fine enough?
If your DITTING Grinder isn't grinding fine enough, the grinding discs might be worn out or not correctly aligned. In either of these cases, contact your supplier.
What to do if my DITTING 1203 is making noise but not grinding?
If your DITTING Grinder is making noise but not grinding, it could be due to a clogged spout or a grinding degree that's too fine. Try setting the grinding degree to the 'coarsest grind' and start the grinding process to clear it. After that, set the grinding degree to your desired setting. If the issue persists, a foreign object may have entered the grinding mechanism; in this case, contact your supplier.
What to do if my DITTING Grinder is not grinding and making noise?
If your DITTING Grinder isn't grinding and is making noise, first ensure the power plug is properly inserted into a working socket. Next, check that the grinder is switched on by setting the on/off switch to the **I** position (only applicable to models KFA 1203 / 1403 and KFA 1403 Industrial). Also, verify if the thermal overcurrent circuit-breaker has tripped and push it back in if necessary. If it repeatedly trips, or if the electrical fuse has tripped, contact your supplier after checking and restoring or replacing the fuse and reducing the electrical load on the circuit.
Emphasizes the importance of reading and keeping the original instructions for safe operation.
Details the meaning of warning, caution, and note symbols used in the manual.
Specifies that the grinder is only for whole roasted coffee beans and for commercial use.
Provides crucial safety warnings regarding electric shock, proper handling, and cable management.
Initial checks and preparation steps before operating the grinder.
Verify the grinder and its accessories upon delivery and check for any damage.
Explains how to adjust the grind setting from fine to coarse for coffee beans.
Instructions on how to correctly fill the bean hopper with whole roasted coffee beans.
Steps for preparing the coffee bag and initiating the grinding process for different models.
Procedure for switching to a different type of coffee beans, including cleaning steps.
Steps for cleaning the area around the grinder and its underside.
Instructions for wiping down the grinder's exterior and drip tray.
Daily cleaning procedure for the bean hopper to maintain coffee taste.
Procedure for cleaning the internal grinding mechanism using special cleaner.
Guidance on how to sort and dispose of the product packaging materials.
Instructions for legally and environmentally responsible disposal of old grinders.
General| Model | 1203 |
|---|---|
| Category | Grinder |
| Type | Commercial Grinder |
| Burr Diameter | 120 mm |
| Motor Power | 750 W |
| Weight | 20 kg |
| Hopper capacity | 1.5 kg |
| Grind Settings | Stepless |
| Frequency | 50/60 Hz |
| Grinding Mechanism | Burr |
| Grinding capacity coarse | up to 4 kg/h |
| Voltage | 220-240V |
To Next Page
