DITTING 1203 - Operating principle and model differences; Before putting into service; Check grinder and scope of delivery

11
1203 / 1403 | ENSHOP GRINDER
10
CAUTION!
Risk of pping and injury!
Incorrect handling of the grinder can result in injury.
– Posion the power cable so that nobody can become entangled
in it and cause the grinder to fall.
– Place the grinder on a level and stable surface to prevent it from
falling o.
Operang principle / Dierences between models
All the grinder models described in these original instructions are shop grinders
(see chapter on “Intended use").
The 1203 and 1403 model series differ in their grinding capacity and their type
of power supply (see chapter on "Technical data").
Bag clamping and grinding are carried out separately and started manually in
models with the prefix KR. These models are equipped with a bag shaking unit.
The bag is clamped and grinding started automatically in one process in models
with the prefix KFA. These models are not equipped with a bag shaking unit.
Before pung into service
Check the grinder and scope of delivery
NOTE!
Risk of damage!
Take care when opening the packaging with a sharp knife or other
pointed objects, otherwise the grinder may be damaged.
– Be very careful when opening the packaging.
1. Remove the grinder from the packaging.
2. Check that the delivery is complete (see Fig. A).
3. Check for damage to the grinder or the individual parts. If this is the case,
do not use the grinder. Contact your supplier (see chapter on “Maintenance
and service”).
Please note that the grinder is subjected to an extensive function
test before delivery and may still contain residues of coffee powder.