DITTING 1203 - General Information; Reading and retaining the original instructions; Explanation of symbols used

7
1203 / 1403 | ENSHOP GRINDER
6
1203 / 1403 | ENSHOP GRINDER
6
General Informaon
Reading and retaining the original instrucons
Carefully read these original instructions and the safety information
before you put the described shop grinder of the 1203 or 1403
model series into service. This is the only way that you can operate
the shop grinder safely and use it without any risk.
These original instructions are based on the standards and regulations in force
in the European Union. Please also note the guidelines and laws of your specific
country if abroad.
For reasons of clarity, the shop grinder will be referred to only as "grinder" in
the following.
Keep these original instructions for future reference. Also pass these original
instructions on to subsequent owners and users of the grinder.
Explanaon of symbols used
The following symbols and signal words are in these original instructions, on
the grinder and on the packaging.
WARNING!
This signal word/symbol indicates a hazard with a medium degree
of risk which can lead to death or serious injury if not avoided.
CAUTION!
This signal word/symbol indicates a hazard with a low degree of
risk which can lead to minor or moderate injury if not avoided.
NOTE!
This signal word warns of possible material damage.
This symbol indicates important information concerning operation
or handling.