DITTING 1203 - Troubleshooting

17
1203 / 1403 | ENSHOP GRINDER
16
Troubleshoong
Fault Cause Remedy
The grinder is
making noise but
not grinding.
• The spout is clogged. t Set the grinding degree to the
"coarsest grind" and start the
grinding process.
The grinder will clear itself.
Then set the grinding degree
to the desired setting during
operation.
t Actuate the knocker of the
grinder several times to clear
the blockage.
• The grinding degree
is too fine.
t Set the grinding degree to the
"coarsest grind" and start the
grinding process. The grinder
will clear itself.
Then set the grinding degree
to the desired setting during
operation.
Contact your supplier if the
problem persists
�see chapter on “Mainte-
nance and service”).
• A foreign object has
got into the grinding
mechanism.
t Contact your supplier
(see chapter on “Mainte-
nance and service”).