Page 24
TEST VEND
Allows the service technician to test vend any item.
Press the number "9" on the keypad and the display will read "ITEM". Select the item/column to be tested by
pressing the corresponding keys on the keypad (i.e. A6), and the corresponding solenoid will cycle.
Press the "CLR" key to return to "SERVICE MODE".
CLEAR ERRORS
Allows the service technician to clear any recorded errors.
Press the number "0" on the keypad and the display will read "CLEAR ERRORS * = Y". Press the "*" key and the
errors are cleared and the display returns to "SERVICE MODE".
To Next Page
Loading...
