EasyManua.ls Logo

Dixie Narco 2054 - TEST MODE; REGULAR PRICES

Default Icon
98 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Page 37
WINNER MODE (PASSWORD REQUIRED)
Allows the service technician to set the machine up to dispense a free product on a random basis. This mode
CANNOT be made item selective. If set, each product in the machine is subject to being dispensed free. The
winning customer is determined by the program picking a number at random from 1 to the winner mode set number.
Inputting a 0 disables this mode. Press the number "4" on the keypad and "WINNER MODE ##" will scroll across
the display (the ## is the current setting). Press the "*" key and the display will read "PW'. Enter the password, the
display will read "OK" momentarily then "MODE" will be displayed. Enter a number from 1 to 255 and press the "*"
key. The mode is set and the display returns to "SETUP MODE".
DATE / TIME
Shows the day, date, and time setting currently in the system in the following format: SUN 09/08/96 1330
Press the number "5" on the keypad and the day, date, and time will scroll across the display. Setting the day, date,
and time is covered in detail in the INITIAL PROGRAMMING section of this manual. See page 35. Press the "CLR"
key to return to "SETUP MODE".
TOTAL SALES
Shows total sales since machine manufacture or last MASTER RESET. This total is not cleared by CLEAR
TOTALS. Press the number "6" on the keypad and the display will read "TOTAL SALES $###.##". Press the "CLR"
key to return to "SETUP MODE".
SET PASSWORD (PASSWORD REQUIRED)
Allows the service technician to enter a personalized password.
IF YOU DECIDE T0
CHANGE FROM THE DEFAULT PASSWORD, PLEASE ENTER THE NEW PASSWORD
SLOWLY AND CAREFULLY!!!
Press the number "0" on the keypad, "ENTER PASSWORD" will scroll across the display. Press the "*" key and the
display will read "PW". Enter the password, the display will read "OK" momentarily then "NEW PW" will be
displayed. Enter the new password. After the fourth character of the new PW is entered the display will scroll
"ENTER PASSWORD". Press the "CLR" key and the display returns to "SETUP MODE".

Table of Contents

Related product manuals