Page 11 of 72
CHECK IT OUT
WHAT TO DO WHAT SHOULD HAPPEN
Plug the power cord in. The compressor, condenser fan, and evaporator fan
run, "Use Correct Change" window lights and
"Sold Out" lamps light. The fluorescent tubes light.
Load at least six beverages in each column. Sold out lights go off in single price venders and
sold-out message goes off in SIID venders.
Close the vender door, put in correct change, and
push a select button.
Product is dispensed and delivered.
If a dollar bill validator is used: Load the changer
with at least 10 quarters, 10 dimes, and 10
nickels. Prime the coin changer, insert $1 bill in
the validator.
Correct change is paid back.
Push a select button. Product is dispensed and delivered.
Once the vender is placed on location, load the
changer money tubes. Fully load the vender with
product and allow it to run overnight.
Return to the vender the next day and vend a
product from each column. A cold product is
dispensed from each column and correct change is
returned. The first product vended has a
temperature of 0
0
C (32
0
F) to
1
0
C (34
0
F).
To Next Page
Loading...
