24
ONE YEAR LIMITED WARRANTY
DJH Designs warranties its products against defects in materials and workmanship for a period of one year from
the date of purchase. DJH Designs will at its option, either repair or replace products which prove to be defective.
Exclusions
e warranty on your DJH Designs MEK Rub Test Machine will not apply to defects or damages resulting from;
• Improper or inadequate maintenance by the customer.
• Unauthorized modication or misuse.
• Operation outside of the environmental specications of the equipment.
• Improper site preparation or maintenance.
• Contaminated air supply (moisture, oil, debris)
e warranty period begins either on the date of delivery, or when the purchase price includes installation by DJH
Designs, on the date of installation.
Warranty Limitations
e warranty set forth above is exclusive and no other warranty, whether written or oral, is expressed or implied.
DJH Designs specically disclaims the implied warranties of merchantability and tness for a purpose.
Some states or provinces do not allow limitation on how long an implied warranty lasts, so the above limitation or
exclusion may not apply to you. However, any implied warranty of merchantability or tness is limited to the one
year duration of this written warranty.
Obtaining Service during the Warranty Period
Should your hardware fail during the warranty period, send your product to DJH Designs or you may also request
service from the component manufacturer or one of their authorized agents. To locate a service center or to receive
information about obtaining service, please see the service and support phone list on the next page
Obtaining Service aer the Warranty Period
If your hardware fails aer the warranty period, contact DJH Designs to obtain service.
When sending equipment to DJH Designs, follow the repacking guidelines listed below. Also, complete and enclose
a copy of the service information form at the end of this chapter. Insuring the equipment for shipment is highly
recommended.
Shipping damages as a result of inadequate packaging is the customer’s responsibility. Use the
original packing materials whenever possible.
CAUTION