5. Link the drone to the remote control device. Press and hold the power button on the drone
until the battery level LEDs blink in sequence.
6. Press and hold the power button on the remote control device until it starts to beep
continually, and the battery level LEDs blink in sequence.
7. After successful linking, the battery level LEDs of both the drone and remote control device
turn solid and display the actual battery level. Then, the remote control device stops beeping.
Step 3: Activate for the first time
Ensure that the drone has been linked to the goggles and the remote control device successfully.
Connect the USB-C port of the goggles to the mobile device, launch the DJI Fly app, and then
complete the activation according to the on-screen instructions (network connection required
the whole way through).
Watch this video for the more details.
Check the Activation Information
You can go to the Activation Info page for the specific information.
* You may need to learn more about How to Check Your Product's Serial Number.
To Next Page
Loading...
