How to Use the Product
Prepare the Drone
Step 1: Remove the gimbal protector, and check if the microSD card and Type-C port cover has
been attached properly.
Step 2: Check the battery level of the flight battery, power it on, put the drone on a flat surface,
and note that the drone should be forward-facing.
Watch the video for the more details.
Prepare the Goggles
· Prepare the DJI Goggles 2 (included in the Pro-View Combo)
Let's go get the installation, diopter adjustment, touch panel operations and parameter
configurations.
Watch the video for the more details.
· Prepare the DJI FPV Goggles V2 (included in the Fly Smart Combo)
Let's go get the installation, diopter adjustment, and other easy-to-use operations.
Watch the video for the more details.
Prepare the DJI Motion Controller
Let's go get the buttons, power-on/off, and other easy-to-use operations.
Watch the video for the more details.
To Next Page
Loading...
