How to Remove the Gimbal Protector
[Important] Prior to powering on the drone, remove its gimbal protector.
· During power-on, the gimbal vibrates and runs self-check*. If the gimbal protector isn't
removed, it may damage the motor or affect its life expectancy, or even impact the flight safety.
· To safeguard the camera lens and gimbal axis arm, you'd better mount the gimbal protector to
the drone after each time of use.
* If the drone is powered on without activation, the gimbal will not vibrate and will not run self-
check.
· How to Remove the Gimbal Protector
Note: If GIF images are not displayed properly, click here for details.
Pry the top of the gimbal protector gently, and then remove it.
To Next Page
Loading...
