Note
After files are exported, please be sure to cover the USB-C port and microSD card slot properly in
case of any damage to the propeller.
How to Update the Firmware
Here are two methods for updating the DJI Avata firmware:
1. (Recommended) Use the DJI Fly app to update the whole firmware package including the
drone, goggles, and remote control device firmware.
2. Use the DJI Assistant 2 (Consumer Drones Series) to update each firmware separately.
· Update through DJI Fly
First, power on the drone, goggles, and remote control device, and ensure all these devices are
linked. Then, connect the USB-C port of the goggles to the mobile device, run the app, and
update the firmware by following the on-screen prompts. Note that an internet connection is
required the whole way through.
· Update through DJI Assistant 2 (Consumer Drones Series)
To Next Page
Loading...
