How to Get it Charged
Choose an Adapter
As DJI Avata does not come with an adapter, you can refer to the following operations:
1. Charge the drone and goggles: with a PD charger. The given USB-C to USB-C power cable is to
be used with a PD charger. If you need one, we recommend DJI 30W USB-C Charger. It will take
around 90 minutes to get the drone fully charged, and around 100 minutes to get the goggles
fully charged.
2. Charge the motion controller: with a micro USB charger connected to a Type-C cable (Fast
charging is not supported). If being used with a 5V 2A charger, it will take around 2.5 hours to
get the controller fully charged. If you need one, please go to a third-party platform and search
by “10W USB Charger”.
Please do not use a charger higher than 5V to charge DJI Motion Controller, especially fast
charging power adapter. Otherwise, DJI Motion Controller will be damaged and cannot be
used.
To Next Page
Loading...
