dji Enterprise X-Port - Other Parameter Settings; Functions; Gimbal Function Debugging

©
2020
大疆创新 版权所有
13
DJI ENTERPRISE X-PORT User Manual
Other Parameter Settings
The following parameters can be set on “Gimbal Settings” page in DJI Pilot app.
1. Gimbal Pitch Limit Extension
The gimbal pitch control range is from -90°to +30°when turned off, and from -120°to +30°when
turned on.
2. Max Gimbal Pitch / Yaw Speed
The greater the value (the greater the gimbal speed), the faster the gimbal rotates when operating the
remote controller dial.
Functions
The following parameters can be adjusted by end users.
Gimbal Function Debugging
This function is available on “Gimbal Function Debugging” in DA2 or “Gimbal Settings” in DJI Pilot app.
1. Gimbal Pitch / Yaw Speed Adjustment
Use the remote control dial or drag the Gimbal Pitch / Yaw Speed Adjustment slider on DA2 to
control the gimbal rotating.
2. Gimbal Angle Adjustment
Enter a pitch or yaw value in the Gimbal Angle Adjustment box to rotate the gimbal to a specic
angle.
3. Gimbal Auto Calibration
If the gimbal is still not balanced, tap Gimbal Auto Calibration to adjust it.
4. Re-centering the Gimbal
Tap to center the gimbal.