dji GOGGLES INTEGRA MOTION COMBO - DJI RC Motion 2

DJI Goggles Integra Motion Combo User Manual
©
2023 DJI All Rights Reserved.
7
DJI RC Motion 2
1
2
6
7
3
8
4
9
5
9. Battery Level LEDs
10. Power Button/Link Button
Press once to check the current battery level.
Press, and then press and hold to power the goggles on or o.
When powered on, press and hold the button to initiate linking.
11. USB-C Port
For charging
,
connecting headphones, or connecting the goggles to a computer.
Only supports Type-C headphones and headphone adapters with built-in DAC
(digital-to-analog converter).
It is recommended to use the USB-C OTG cable provided and a USB-A to USB-C
cable to connect the goggles to a mobile device.
The goggles do not support computer connection using a USB-C to USB-C cable.
12. IPD (Interpupillary Distance) Slider
Slide left and right to adjust the distance between the lenses until the image is proper-
ly aligned.
1. Battery Level LEDs
2. Lock Button
Takeo: press twice to start the aircraft motors, then press and hold to make the air-
craft take o. The aircraft will ascend to approximately 1.2 m and hover.
Landing: while the aircraft is hovering, press and hold to land the aircraft and stop the
motors.
10