dji MATRICE 200

14
©
2017 DJI All Rights Reserved.
MATRICE 200 User Manual
Flight Status Indicator
The aircraft features Front LEDs, a Rear LED, and Aircraft Status Indicators. The positions of these
LEDs are shown in the gure below:
The Front LEDs show the orientation of the aircraft. Front LEDs glow solid red when the aircraft is
turned on to indicate the front (or nose) of the aircraft. Front and rear LEDs can be turned off in the
DJI GO 4 app. The Aircraft Status Indicators communicate the system status of the ight controller.
Refer to the table below for more information about the Aircraft Status Indicators.
Aircraft Status Indicator Description
Normal
Red, yellow, green,
blue, and purple ashes
Turning On and Self Diagnostic Testing
×4 Four yellow ashes Warming Up
Slow green ashing P-mode with GPS*
×2 Two green ashes
P-mode with Forward and Downward
Vision Systems*
Slow yellow ashing
No GPS and Forward and Downward
Vision Systems
Fast green ashing Braking
Warning
Fast yellow ashing Remote Controller Signal Lost
Slow red ashing Low Battery Warning
Fast red ashing Critical Low Battery Warning
Red ashing IMU Error
— Solid Red Critical Error
Fast alternating red and yellow
ashing
Compass Calibration Required
* Slow green ashes indicate P-mode, and fast green ashes indicate S-mode.
Rear LEDFront LED
Aircraft
Status Indicator