dji MATRICE 200

60
©
2017 DJI All Rights Reserved.
MATRICE 200 User Manual
Restricted Areas:
(1) Restricted Areas do not have ight altitude restrictions.
(2) R miles around the designated restriction area is a Takeoff Restricted area. Aircraft cannot take
off within this zone. The value of R varies based on the denition of the restricted areas.
(3) A “warning zone” has been set around the Restricted Area. When the aircraft approaches within
0.062 miles (100 m) of this zone, a warning message will appear in DJI GO 4.
Restricted Areas
R1
66 feet
1 mile
320 feet
R2
100m R
Airports
1640
feet
Restricted Areas
R1
66 feet
1 mile
320 feet
R2
100m R
Airports
1640
feet
When flying in a safety zone, the aircraft's status indicator will blink red rapidly and
continue for three seconds, then switch to indicate current ying status and continue for
ve seconds at which point it will switch back to blinking red.
For safety reasons, please do not y close to airports, highways, railway stations, railway
lines, city centers, or other sensitive areas. Fly the aircraft only within your line of sight.
(4) When the aircraft ies within 320 feet (100 meters) of a No-Fly Zone, a warning message will
appear in DJI GO 4.