©
2020 DJI All Rights Reserved.
113
MATRICE 300 RTK User Manual
M3-5
Using the Aircraft Cradle
Once the aircraft needs to be operated upside down, make sure to use aircraft cradle for protection.
Extended Screw Holes Description
Use the specified screw to avoid damage to the thread of the screw hole. Make sure that the
accessories are rmly installed.
FAR Remote ID Compliance Information
The aircraft complies with the requirements of 14 CFR Part 89:
The aircraft automatically initiates a pre-ight self-test (PFST) of the Remote ID system before takeo
and cannot take o if it does not pass the PFST
[1]
. The results of the PFST of the Remote ID system
can be viewed in a DJI ight control app such as DJI Pilot 2.
The aircraft monitors the Remote ID system functionality from pre-ight to shut down. If the Remote ID
system malfunctions or has a failure, an alarm will be displayed in a DJI ight control app such as DJI
Pilot 2.
The user shall keep the DJI ight control app running in the foreground and always allow it to obtain
the location information of the remote controller.
Developers who develop third-party applications based on the DJI Mobile SDK shall obtain and
display the PFST results and the failure status of the Remote ID system during operation by calling
specic APIs
[2]
.
[1] The pass criterion for PFST is that the hardware and software of the Remote ID required-data source and transmitter radio in
the Remote ID system are functioning properly.
[2] For detailed APIs information, please visit https://developer.dji.com/mobile-sdk/
To Next Page
Loading...
