EasyManua.ls Logo

dji MATRICE 300 RTK - Gimbal Camera View

dji MATRICE 300 RTK
114 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
©
2020 DJI All Rights Reserved.
73
MATRICE 300 RTK User Manual
Gimbal Camera View
Using Gimbal Camera View
Gimbal camera view will appear when you switch the main view to the gimbal camera. Below is an
illustration using the zoom camera of the H20T as the main view.
1. Navigation Display: Refer to the Navigation Display section for details. Note that in gimbal camera
view, the horizontal speed, wind speed, gimbal pitch angle and pitch scale, and the inclination of
the gimbal relative to the ground are shown on the left side. When the gimbal is at a key angle such
as -90°, 0°, or -45°, the number will be highlighted. The right side of Navigation Display shows the
altitude, relative altitude, vertical obstacle sensing information, and vertical speed bar.
2. Camera Type: displays the camera type for the current main view.
3. Camera Parameters: displays the camera’s current shoot/record parameters.
4. Focus Mode: Tap to switch the focus mode, between MF (manual focus), AFC (continuous
autofocus) and AFS (single autofocus).
5. Storage Mode: displays the remaining storage capacity of the aircraft’s microSD card. Tap to switch
the display mode, to show the remaining number of photos that can be taken in photo mode or the
remaining recording time in video mode.
6. Switch to Auto/Manual Exposure: The zoom camera supports Auto and M modes. The EV can be
set in Auto mode, and the ISO and shutter can be set in M mode.
7 Camera Settings: Tap to enter the camera setting menu. The camera setting menu may vary by
camera type. Select a camera type to view its parameters.
8 Photo/Video Toggle: Tap to switch between photo and video modes, and select dierent shooting
or recording modes.
a. The photo modes include single, timed, High-Res Grid shooting, panorama, etc.
b. Various resolutions can be selected in video recording mode. The zoom camera supports
resolutions of 3840×2160 and 1920×1080, wide-angle camera supports resolutions of
1920×1080, and the thermal camera supports resolutions of 640×512.
10
1
2 3 4 5 6 7
8
9
11
12
13
14
15
16
17
18
19 20 21

Table of Contents

Other manuals for dji MATRICE 300 RTK

Related product manuals