dji MATRICE 300 RTK - Page 74

74
©
2020 DJI All Rights Reserved.
MATRICE 300 RTK User Manual
9. Shoot/Record Button: Tap to take a photo or start or stop recording.
10. Playback: Tap to enter the album to view and download photos/videos stored in the aircraft's
microSD card.
11. Zoom Bar: Drag to adjust the zoom ratio.
12. FPV Camera View: Tap to switch to FPV camera view. The FPV camera view supports zooming in
and out.
13. Map View: Tap to switch to map view. The map view supports zooming in and out.
14. Switch to Wide/Zoom Camera Lens: Tap to switch between the wide-angle camera lens and the
zoom camera lens.
15. Switch to Visible Light/Thermal Camera Lens: Tap to switch between the visible light camera lens
(wide-angle camera or zoom camera) and the thermal camera lens.
16. Gimbal Mode: displays the current gimbal status as follow mode. Tap to select an action such as
gimbal recenter, gimbal pan recenter, gimbal tilt down, or gimbal down, or switch to gimbal free
mode. Refer to the sections on the aircraft gimbal working modes for the detailed description of
each mode.
17. Smart Track: The aircraft's gimbal camera can track the target (person/vehicle/boat) when Smart
Track is enabled. Refer to the Smart Track section for more details.
18. RNG Laser Rangender: The straight-line distance between the aircraft and the target, as well as
the height of the target can be measured using the RNG Laser Rangender. Refer to the RNG Laser
Rangender section for more details.
19. PinPoint: Tap and hold the icon to expand the PinPoint settings panel, which allows you to set
the PinPoint color, view all target points, or enable the default display of target points in video
transmission view. Refer to the PinPoint section for more details. After selecting a PinPoint, the user
can tap the Look At icon to rotate the gimbal, allowing the camera to look at the target.
20. Status of Photo/Video Upload to Cloud: displays the status of a photo/video upload from DJI Pilot 2
to DJI FlightHub 2 or the connection status of a live stream; tap to view the details. If you are using
the DJI FlightHub 2 cloud service, you can quickly congure its media le upload settings.
21. Mission Flight Control/Status: displays the progress of a mission ight in gimbal camera view. Tap
the Pause/Resume button to pause/resume the task, and tap the panel to view the mission ight
name and actions.