dji MATRICE 300 RTK - Mission Flight Planning

©
2020 DJI All Rights Reserved.
85
MATRICE 300 RTK User Manual
Mission Flight
Introduction
Tap on the homepage of DJI Pilot 2 or the mission ight icon in camera view to enter the mission library.
The user can view created mission ight routes, or newly created Waypoint, Mapping, Oblique, or Linear
Flight missions. The above four types of missions are generated by the app; Waypoint ights can also
be created through Live Mission Recording.
Waypoint Mapping Oblique
Set Waypoints Live Mission
Recording
Waypoint ights can be planned in of two ways: Set Waypoints and Live Mission Recording. Use Set
Waypoints to create a route by adding editable waypoints on the map. Use Live Mission Recording to
create a route by adding waypoints and editing the target in photos captured along the route.
There are two functions which can be achieved:
Waypoints 2.0: Edit and save the waypoints before takeo then start ying.
AI Spot-check: Edit and save the waypoints during ight, the mission will be saved after ight.
Waypoint Mapping Oblique
Set Waypoints Live Mission
Recording
Linear Flight
Mission Flight Introduction
The mission ight function is illustrated below with Waypoint ights as an example.