dji MATRICE 300 RTK - Page 84

84
©
2020 DJI All Rights Reserved.
MATRICE 300 RTK User Manual
Line and Area Annotation Management
Users can draw lines and areas on the map for synchronizing key information of roads and land.
1. Tap to display the Edit Point view.
2. Tap to display the Edit Line view.
3. Tap to display the Edit Area view.
1
2
3
Annotation Sharing
When operating the H20N or H20 series gimbal camera, the location of the target point identied by
PinPoint can be synchronized with camera view, Navigation Display, map view, and DJI FlightHub 2 for
sharing of location information. It can be displayed on both video transmission view and map view.
In Advanced Dual Operator mode, all point, line and area annotations can be synchronized with another
remote controller.
When connected to DJI Flighthub 2, the DJI Pilot 2 app and the point, line and area annotations of DJI
Flighthub 2 can be synchronized with each other. They can be viewed on the remote controller and
other devices logged into DJI Flighthub 2 for real-time sharing of locations and annotations.