dji OSMO ACTION 3 - Battery Specifications

DJI Osmo Action 3
User Manual
©
2022 DJI All Rights Reserved.
29
Type
LiPo 1S
Charging Temperature
5° to 40° C (41° to 104° F)
Operating Temperature -20° to 45° C (-4° to 113° F)
Voltage 3.85 V
Max Charging Power 23 W
Operating Time
160 mins
[3]
[1] Before use, close the battery compartment cover and the USB-C port cover, and tighten the
Lens Protective Cover. It is recommended to install the Waterproof Case for long-duration
underwater shooting or in environments with high water impacts or pressure. Osmo Action
3 and its Waterproof Case have an IP68 waterproof rating. Do not use the camera in hot
springs or expose it to corrosive liquids.
[2] EIS is not supported in Slow Motion and Timelapse modes. HorizonSteady is only available
when the video resolution is 1080p (16:9) or 2.7K (16:9) with a frame rate of 60fps or below.
HorizonBalancing is only available when the video resolution is 1080p (16:9), 2.7K (16:9), or
4K (16:9) with a frame rate of 60 fps or below.
[3] Tested in a 25° C (77° F) laboratory environment while recording 1080p/30fps video with EIS
disabled and the screens off, and should be used for reference only.