EasyManuals Logo

dji PHANTOM 3 User Manual

dji PHANTOM 3
59 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #18 background imageLoading...
Page #18 background image
18
©
2015 DJI. All Rights Reserved.
Aircraft
Phantom 3 Advanced
User Manual
The Intelligent Flight Battery must be fully charged before using it for the first time. Refer to
“Charging the Intelligent Flight Battery” for more information.
Be aware that the output power of the supplied Phantom 3 Advanced charger is 57 W.
DJI Intelligent Flight Battery Functions
1. Battery Level Display: the LED indicators display the current battery level.
2. Battery Life Display: the LEDs display the current battery power cycle.
3. Auto-Discharging Function: To prevent swelling, the battery automatically discharges to below 65% of
total power when it is idle for more than ten days. It takes around two days to discharge the battery to
65%. It is normal to feel moderate heat being emitted from the battery during the discharge process.
Discharge thresholds can be set in the DJI GO app.
4. Balanced Charging: Automatically balances the voltage of each battery cell when charging.
5. Overcharge Protection: Charging automatically stops when the battery is fully charged.
6. Temperature Detection: The battery will only charge when the temperature is between 0°C (32°F) and
40°C (104°F).
7. Over Current Protection: The battery stops charging when high amperage (more than 8 A) is detected.
8. Over Discharge Protection: To prevent over-discharge damage, discharging automatically stops when
the battery voltage reaches 12 V.
9. Short Circuit Protection: Automatically cuts the power supply when a short circuit is detected.
10. Battery Cell Damage Protection: The DJI GO app displays a warning message when a damaged
battery cell is detected.
11. Battery Error History: Browse the battery error history in the DJI GO app.
12. Sleep mode: To save power, the battery enters sleep mode after 20 minutes of inactivity.
13. Communication: Information pertaining to the battery’s voltage, capacity, current, etc. is transmitted to
the aircraft’s main controller.
Refer to
Phantom 3 Professional / Advanced Intelligent Flight Battery Safety Guidelines
before
use. Users take full responsibility for all operations and usage.
Intelligent Flight Battery Charger
Using the Battery
LED1
LED2
Battery Level Indicators
LED3
LED4
Power Button (Bulit-in LED)
DJI Intelligent Flight Battery
The DJI Intelligent Flight Battery has a capacity of 4480 mAh, a voltage of 15.2 V, and a smart charge/
discharge functionality. It should only be charged using an appropriate charger that has been approved
by DJI.

Other manuals for dji PHANTOM 3

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the dji PHANTOM 3 and is the answer not in the manual?

dji PHANTOM 3 Specifications

General IconGeneral
Max Flight Time23 minutes
Battery Capacity4480 mAh
Weight1280 g (Including battery and propellers)
Max Ascent Speed5 m/s
Max Descent Speed3 m/s
Max Service Ceiling Above Sea Level6000 m
GPS ModeGPS/GLONASS
Battery Voltage15.2 V
Battery TypeLiPo 4S
Max Charging Power100 W
Lens FOV94°
Aperturef/2.8
Shutter Speed8s -1/8000s
Max Image Resolution4000 x 3000
Max Bitrate40 Mbps
Max Speed16 m/s (ATTI mode, no wind)
Video Resolution2.7K: 2704x1520p 24/25/30 (29.97); FHD: 1920x1080p 24/25/30/48/50/60
Operating Temperature0°C to 40°C
Transmitter Power (EIRP)20 dBm (FCC), 14 dBm (CE)
Video Recording Modes2.7K, FHD
Camera Sensor1/2.3" CMOS
ISO Range100-3200 (video), 100-1600 (photo)
Photo FormatsJPEG, DNG
Video FormatsMP4/MOV (H.264)
Remote Controller Operating Frequency2.4 GHz
Mobile Device HolderFor mobile phones or tablets
Hover Accuracy RangeVertical: +/- 0.5 m; Horizontal: +/- 1.5 m

Related product manuals