©
2015 DJI. All Rights Reserved.
45
Flight
Preflight Checklist
1. Remote controller, aircraft battery, and mobile device are fully charged.
2. Propellers are mounted correctly and firmly.
3. Micro-SD card has been inserted if necessary.
4. Gimbal is functioning as normal.
5. Motors can start and are functioning as normal.
6. DJI Pilot app connected to the aircraft.
Calibrating the Compass
IMPORTANT: Make sure to calibrate the compass in every new flight location. The compass is very sen- sitive to
electromagnetic interference, which can cause abnormal compass data leading to poor flight performance or
even failure. Regular calibration is required for optimum performance.
DO NOT calibrate your compass where there is a chance of strong magnetic interference, such as magnetite,
parking structures, and steel reinforcements underground.
DO NOT carry ferromagnetic materials with you during calibration such as keys or cellular phones.
DO NOT calibrate beside massive metal objects.
Calibration Procedures
Choose an open space to carry out the following procedures.
1. Ensure the compass is calibrated. If you did not calibrate the compass in the Checklist, or if you have changed
your position since last calibrating it, tap “MODE” in the app and select “Compass Calibra- tion” to calibrate
the compass. Then follow the on-screen instructions.
2. Hold and rotate the aircraft horizontally 360 degrees, and the Aircraft Status Indicator will display a sol- id green
light.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
