46
©
2015 DJI. All Rights Reserved.
Flight
3. Hold the aircraft vertically with nose pointing downward, and rotate it 360 degrees around the center axis.
Recalibrate the compass if the Aircraft Status Indicator show solid red.
If the Aircraft Status Indicator blinks red and yellow after the calibration, move your aircraft to a different
location to carry out compass calibration.
Calibrate the compass before each flight. Launch DJI Pilot App, follow the on-screen instruction to
calibrate the compass.
When to Recalibrate
1. When compass data is abnormal, and the Aircraft Status Indicator is blinking green and yellow.
2. When flying in a new location, or a location that is different from your last flight.
3. When the mechanical structure of the The Phantom 4 has changed, i.e. changed mounting position of the
compass.
4. When severe drifting occurs in flight, i.e. the The Phantom 4 does not fly in straight lines.
Auto Take-off and Auto Landing
Auto Take-off
Use auto take-off to take off your aircraft automatically if the Aircraft Status Indicator displays blinking
green. Follow the steps below to use auto take-off:
1. Launch DJI Pilot app, enter “Camera” page.
2. Ensure the aircraft is in “P” mode.
3. Go through the pre-flight checklist.
4. Tap“ ”, and confirm flight condition. Slide to confirm and take-off.
5. Aircraft takes off and hovers at 1.2 meters above ground.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
