6
©
2022 DJI All Rights Reserved.
Preparing the Remote Controller
Charging the Battery
Use a USB-C cable to connect a USB charger to the USB-C port of the remote controller. The battery
can be fully charged in about 1 hour and 30 minutes with a maximum charging power of 15 W (5V/3A).
It is recommended to use a USB Power Delivery charger.
Recharge the battery at least every three months to prevent over discharging. The battery depletes
when stored for an extended period.
Mounting
Remove the control sticks from the storage slots on the remote controller and screw them into place.
Make sure the control sticks are rmly mounted.
To Next Page
Loading...
