Ronin-S
User Manual
©
2019 DJI OSMO All Rights Reserved.
19
The interval time between shooting photos should be set to one second more than the
shutter time to avoid blurred footage when using a long exposure.
After confirming the camera settings, the panorama range can be set by dragging the
white dots on the grid map, pushing the gimbal manually, or using the virtual joystick. The
total range covered by the endpoints and the shots required to compose the panorama
is displayed above the grid map. The slanted roll motor design allows users to view the
path of the panorama through the built-in display of the camera with little obstruction. The
tilt axis range in Panorama mode is -45° to +90° to avoid capturing the gimbal in the shot
while the pan axis allows you to capture a full 360° rotation.
Tap the shutter button to start capturing the sequence.
Panorama
Panorama mode allows you to capture a series of interconnecting still images with precise
control based on your sensor type, and lens focal length. Make sure you have connected
the camera and gimbal using the corresponding camera control cable before using
Panorama mode.
To Next Page
Loading...
