Ronin-S
User Manual
©
2019 DJI OSMO All Rights Reserved.
21
Make sure the camera and gimbal have been connected using a corresponding camera
control cable.
When pressing the record button on the gimbal. DO NOT use the record button on
the camera.
BalanceAdjustment
Tap the Begin Test button and Ronin-S will check the balance status and provide a score
for each axis. Make sure the gimbal is not obstructed in any way before performing the
balance test and follow the on-screen instructions.
take for the gimbal to travel from one waypoint to the next. Stay Time determines how
long the gimbal will remain steady at the waypoint before moving to the next waypoint.
To Next Page
Loading...
