dji SPARK Quick Start Guide

Activation and Connection
Power on the aircraft Connect to Wi-Fi with
your mobile device
Launch DJI GO 4
Launch DJI GO 4, tap the icon in the upper right corner, scan the
QR Code on the storage box, and follow the prompt for activation.
Use your DJI account to activate the aircraft. Activation requires an internet connection.
Internet
Press once to check the battery level.
Press once, then again and hold to
turn on/off.
The battery is fully charged when
the battery level indicators turn off.
Charge time: ~ 1 hr 20 min
Power Outlet
100~240 V
USB Charger Micro USB Port
HighLow
Prepare the Battery
Charge the battery for the first time to
activate it.
Download the DJI GO 4 App
Search for ‘DJI GO 4’ on the App Store or Google
Play, or scan the QR code to download the app on
your mobile device.
DJI GO 4 is supported in iOS 9.0 (or later) or Android 4.4 (or later).
Spark-XXX
%+*(0
"QQ

dji SPARK Specifications

Operating Environment

max speed	31 mph (50 kph)
operating temperature	32° to 104° F (0° to 40° C)
charging temperature	41° to 104° F (5° to 40° C)

Camera

sensor	1/2.3” CMOS
effective pixels	12 Megapixels
video recording modes	FHD: 1920×1080 30p

Power

charger input	100-240 V, 50/60 Hz, 0.5 A
charger output	5 V 3 A / 9 V 2A / 12 V 1.5 A
battery capacity	1480 mAh

Remote Control

operating frequency	2.4G / 5.8G
max transmission distance (Wi-Fi)	100 m (Distance), 50 m (Height)
max transmission distance (Remote Controller)	2000 m

Weight and Dimensions

weight	300 g
dimensions	143×143×55 mm