DLAB Laboratory Instruments DM0412S - Safety Precautions; General Safety Guidelines

2
Safety Reminder
Common safety precautions
Carefully read the following safety precautions for a thorough understanding.
 Follow the instructions and procedures described in this manual to operate this centrifuge safely.
 Carefully read all safety messages in this manual and the safety instructions on the centrifuge.
 Safety messages are labeled as indicated below. They are in combination with signal words of
“WARNING” and “CAUTION” with the safety alert symbol to call your attention to items or
operations that could be dangerous to you or other persons using this centrifuge. The definitions of
signal words are as follows:
WARNING：Personal Danger
Warning notes indicate any condition or practice, which if not strictly observed, could result in personal
injury or possible death.
CAUTION：Possible damage to centrifuge
Caution notes indicate any condition or practice, which if not strictly observed or remedied, could result in
damage or destruction of the centrifuge.
NOTE：Notes indicate an area or subject of special merit, emphasizing either the product’s capability or
common errors in operation or maintenance.
 Do not operate the centrifuge in any manner not described in this User Manual. When in doubt or have
any troubles with this centrifuge, ASK FOR HELP.
 The precautions described in this User Manual are carefully developed in an attempt to cover all the
possible risks. However, it is also important that you are alert for unexpected incidents. Be careful
operating this centrifuge.
WARNING
 This centrifuge is not explosion-proof. Never use explosive or flammable samples.
 Do not install the centrifuge in or near places where inflammable gases are generated or chemicals are
stored.