DLAB Laboratory Instruments DM0412S - Specifications and Conditions; Technical Specifications; Operational and Environmental Conditions

4
1. Specifications
Maximum speed
4500rpm(500-4500rpm), increment: continue
Maximum RCF
2490×g
Maximum capacity
10ml×12, 15ml×8
Timer
1min -30minutes
Noise
56dB(A)
Driving Motor
DC motor
Safety devices
Door interlock, Over-speed detector
Power requirements
Single-phase, 110V-120V, 50Hz/60Hz, 3A.
220V-240V, 50Hz/60Hz, 3A
Ambient condition
-Set-up site
-Altitude
-Ambient temperature
-Humidity
-Excess-voltage category
-Pollution degree
Indoor only
Up to 2000 m above sea level
2°C ～ 40°C
80%
II
2
Device protection class
I
Dimensions（mm）
（L）280×（W）364×（H）266
Weight
6kg
2. Required Operational Conditions
2.1 Basic operational conditions
（1）Power: 110V-120V, 50Hz/60Hz, 3A.
220V-240V, 50Hz/60Hz, 3A.
（2）Ambient temperature: 2℃~40℃.
（3）Relative humidity: ≤80%.
（4）No vibration and airflow around.
（5）No electric dust, explosive and corrosive gases around.