DMP Electronics Thinline Aqualite 7000 Series User Manual

Digital Monitoring Products, Inc | 7000 Series Installation and Programming Guide 24
Site Code Display
You can program up to eight 8-digit site codes. The site code
range is 0-16,777,214.
In the keypad display, enter site code 1 and press CMD. The
display will ask for site code 2 followed by site code 3 and
so on. When you have selected the site code you want to
change, press CMD.
Number of User Code Digits
The keypad recognizes user codes from 4-12digits long.
Press any top row select key or area to enter a user code
digit length. This number must match the user code number
length being programmed in the panel. The device will
recommend a number of user code digits based on the user
code length. Default is 5.
All bits are read and converted into a decimal number string.
The number string is left padded with 0 (zero) if needed for
long user code lengths.
Example: # decoded 1234567
10 digits 0001234567
4 digits 4567
SITE CODE 1:
NO OF USER CODE
DIGITS: 5

DMP Electronics Thinline Aqualite 7000 Series Specifications

General

Brand	DMP Electronics
Model	Thinline Aqualite 7000 Series
Category	Keypad
Language	English