Digital Monitoring Products, Inc | 7000 Series Installation and Programming Guide 20
Note: Custom card format programming options are only available on 7063/A,
7073/A, 7163, and 7173 keypads.
Card Formats
Select DMP to allow credentials that use a 26-45bit data
string. The menu advances to REQUIRE SITE.
Select CUSTOM to disable DMP format and program slots 1-8
as needed. The menu advances to FORMAT NO.
Select ANY to allow all Wiegand card reads to activate the
door strike relay. The door strike relay is activated for the
length of time programmed in ZN3 REX TIME. No user code
information is sent to the panel. The menu advances to NO
COMM WITH PNL.
The default card format is DMP.
CARD FORMATS
DMP CUSTOM ANY
CUSTOM CARD FORMAT
To Next Page
Loading...
Need help?
General
