XR500 Series Update
March 2005
Version 108 Software
Effective March 2005, all XR500 Series panels are being manufactured with version 108 (3/1/05)
software. This version is an update from the 106 (1/4/05) software previously shipped and contains
new features.
New Features
Multi-Lingual Option
The XR500 Series panel now provides the option in System Options to view the Programming and User
menus in multiple languages. When more than one language is programmed, the installer or user is
prompted to choose the language to display.
PROG LANGUAGE
Programming Menu Language
Press the COMMAND key to select the programming language(s). Any changes
in PROG LANGUAGE do not take effect until the STOP routine completes.
PRI LANG: ENGLSH
The current primary programming language is displayed. The default language
is English. Press a Select key to change the primary programming language.
ENG SPN
Select the primary programming language.
ENG = English
SPN = Spanish
SEC LANG: NONE
The current secondary programming language is displayed. Selecting a
secondary language allows the installer to view programming in English or
Spanish. When the Programming Menu is accessed, the installer is prompted to
choose the programming display language. If SEC LANG: is set to NONE, the
option to choose a language does not display. To select a secondary language,
press the Select key below the language. Default is NONE.
NONE ENG SPN
Select the secondary programming language.
NONE = No secondary language options are displayed
ENG = English
SPN = Spanish
USER LANGUAGE
User Menu and Status List Language
Press the COMMAND key to select User language(s).
PRI LANG: ENGLSH
The current primary user language is displayed. The default language is
English.
Press a Select key to change the primary User language.
ENG SPN
Select the primary user language.
ENG = English
SPN = Spanish
To Next Page
Need help?
General
