Need help?Do you have a question about the DMP Electronics XR150FC and is the answer not in the manual?
General| Brand | DMP Electronics |
|---|---|
| Model | XR150FC |
| Category | Control Panel |
| Language | English |
Four keys under the display used to choose options shown on screen.
Keys used to enter user codes and other system information.
Key used to advance through displays or complete data entry.
Adjusts the brightness level of the keypad LCD and AC LEDs.
Sets the internal speaker tone for key presses and alerts.
Adjusts the keypad's internal speaker volume for normal and alarm conditions.
Pressing the SILENCE key silences the alarm bells.
Pressing the RESET key performs a sensor reset and silences alarm bells.
Pressing the TEST key performs a system test.
Silences alarm bells or sirens during an alarm without stopping reports.
Resets detectors and clears alarm/trouble displays after an alarm condition.
Displays the current status (armed, bypassed, alarm, open, shorted) of zones.
Procedure for entering a new schedule number and name.
Section detailing how to set schedule start and end times.
To Next Page
