Digital Monitoring Products, Inc. | XR Fire Control Panel User Guide 51
Ambush Codes
Your system may be programmed to allow user number 1 to be used as an
Ambush code. This Ambush code functions identically to a standard code with
the exception that it sends a silent alarm to the central station. This silent alarm
alerts the operator to a duress situation at the premises and prompts immediate
notification of authorities.
Refer to the System Setup section of this guide to see if your system is
programmed for Ambush. If so, do not program a code for user number 1 unless
you intend to use the Ambush function.
To Next Page
Loading...
Need help?
General
