Digital Monitoring Products, Inc. | XR Fire Control Panel User Guide 21
Operates an electric door strike from the keypad.
Note: The door strike function is not available on the Model 7872 Graphic
Touchscreen keypad.
Door Access is used to operate the door strike relay that is built into some
keypads. Power for the door strike is connected to the keypad relay and can be
interrupted by using the Door Access function.
Your system may be pre-programmed at installation to transmit a door access
report to the central station.
1. Access the User Menu. Press COMMAND until DOORACCESS? displays.
2. Press any Select Key. The door strike relay turns on momentarily.
3. The keypad returns to the Status List display.
Door Access
To Next Page
Loading...
Need help?
General
