DMP Electronics XR150 User Manual

Overview of the system's design, features, and user-friendliness.

Discusses the importance of reducing false alarms and how to use the guide.

Recommends weekly testing of the burglary portion of the system.

Descriptions and labels for Thinline, Wireless, and Graphic Touchscreen keypads.

Explains Select keys and the meaning of Power/Armed LED indicators on keypads.

Details on common keys, multi-lingual display, and programming interaction.

How to adjust keypad brightness levels for different keypad types.

Key fob usage, button programming, and special wireless system displays.

Explains system messages like TROUBLE, BUSY, and defines key terms like Arming and Monitoring.

How to view disarmed zones that are in fault.

Details arming options and the process of bypassing zones.

Explains arming messages, exit delay, and key fob operations.

Steps for arming an area system and verifying armed areas.

Procedures for disarming the system and canceling an alarm.

Details arming/disarming, system status, and shortcut key operations for All/Perimeter systems.

How to arm Home/Sleep/Away systems and interpret status displays.

How to extend schedules and use one-button shortcut keys.

Explains arming functions, zone monitoring, and sensor reset capabilities.

Steps to access the User Menu and overview of its options.

Lists and describes available functions within the User Menu.

How to silence alarms, reset detectors, and initiate lockdown.

How to manage door locks, access, and system outputs via the User Menu.

How to activate Z-Wave Favorites and control system outputs.

Procedure for adding new Z-Wave devices to the system.

Renaming, checking status, removing devices, and managing Z-Wave Favorites.

Steps to add Favorites and configure settings for Lights, Locks, and Thermostats.

How to modify or remove Z-Wave devices from existing Favorites.

How to check zone status and bypass or reset zones.

How to use Zone Monitor and test burglary protection.

How to check system hardware conditions and perform system tests.

Steps to add new user profiles defining user authority.

How to manage user profiles, temp codes, and anti-passback settings.

Explains access schedules, re-arm delay, easy arm/disarm, and card plus PIN features.

Information on ambush code, extending closing times, and schedule types.

Step-by-step guides for managing schedules.

How to assign schedules to areas, outputs, doors, and set holiday schedules.

How to set holiday dates and activate Z-Wave Favorites.

How to start and end a fire drill test.

Forms to track system configuration, keypad setup, and area assignments.

How to navigate and view system event logs.

Explains various event display types for system activities.

Explains event displays related to door access, system monitoring, and schedule changes.

Explains event displays for wireless jamming and trouble conditions.

Visual guide for navigating and checking zone status.

Visual guides for navigating bypass zones and zone monitor functions.

Visual guides for adding and changing user codes.

Visual guides for deleting user codes and adding user profiles.

Visual guides for changing and deleting user profiles.

Visual guides for managing output groups and turning outputs on/off.

Information on DMP wireless devices, key fobs, and LED status meanings.

How the door strike relay activates for access control.

Using card readers for arming/disarming and handling entry delay.

Explains receiving system reports via email or cell phone.

Text commands to arm and disarm all or partial areas of the system.

Text commands to control outputs, lights, locks, thermostats, and activate favorites.

Text commands to check system status and manage message subscriptions.