24 XR150/XR350/XR550 User Guide User Menu
Many system features are programmed into a User Menu that you
can access from any keypad. The menu requires you to enter your
user code and then it only shows those functions to which you have
access.
Accessing the User Menu
1. Press the COMMAND key, if the multi-language option is
enabled, the available languages display. Select the language
to use for text display.
2. Press the COMMAND key until MENU? NO YES displays.
3. Select YES. The keypad displays ENTER CODE: –. Enter your
user code and press COMMAND. You can now scroll down
through the list of system features available to you.
User Menu Options
The list below shows the User Menu options in order:
Menu Option Description
ALARM SILENCE Silences an alarm bell or siren.
SENSOR RESET Resets smoke or glassbreak detectors that
have latched due to an alarm condition.
LOCKDOWN Immediately locks all Public Doors.
DOOR LOCK/UNLOCK Immediately locks or unlocks a selected
door.
DOOR ACCESS Momentarily opens the keypad door lock
relay.
ARMED AREAS Displays the name of any areas in the system
that are currently in the armed state.
OUTPUTS ON/OFF Allows you to turn on or off any of the
outputs described in the System Setup
section of this guide.
FAVORITES Allows you to activate any Favorite
described in the System Setup section of this
guide.
User Menu
Z-WAVE SETUP Allows you to Add, List, Remove, Transfer,
and Rediscover Z-Wave devices in your
system. You can create Z-Wave Favorites,
Add, Edit, and Remove Z-Wave devices in
Favorites.
ZONE STATUS Allows you to see if a zone is either armed,
bypassed, in alarm, open, or shorted.
BYPASS ZONES Allows you to Bypass a zone or reset an
already bypassed zone.
ZONE MONITOR Allows you to add or remove a zone from the
monitor mode.
SYSTEM STATUS Displays the current condition of the system
AC power, backup battery, and optional
panel tamper.
SYSTEM TEST Tests the system siren, communication to
the central station, and backup battery on
all XR150, XR350, and XR550 Series panels.
XR550N or XR550E panels allow additional
panic zone testing.
USER PROFILES Allows you to add, delete, or change user
proles.
USER CODES Allows you to add, delete, or change user
codes.
EXTEND CLOSING Allows the Closing Check operation to delay
until the new closing time expires. This
allows the current schedule to ignore its
closing time and not send a LATE TO CLOSE
message to the central station.
SCHEDULES Allows you to add, remove, or change
system schedules.
TIME Allows you to change the Day, Date, or Time
that is currently programmed in the system.
To Next Page
Loading...
Need help?
General
