DMP Electronics XR150 User Manual

XR150/XR350/XR550 User Guide 41User Menu
User Codes
This option allows you to add, delete, or change a user code. You
mayalsoassignspecicUserProlestoindividualusers.
1234 = User Number
34812 = User Code
89456 = PIN
John Smith = User Name
7  = Prole
User Number - Every user is numbered 1 through 9999. This
numberidentiestheusertothesystemandistransmittedtothe
central station when the user arms or disarms areas.
User Code - Each user also has a 3- to 6-digit number to 999999, to
enter into the keypad when arming or disarming the system. Only
4-digit user codes can be assigned to All/Perimeter, Home/Sleep/
Away, or Home/Sleep/Away with Guest system users.
PIN - In a Card Plus PIN system, each user is assigned a unique
PIN (up to 6 digits) to enter into the keypad after presenting their
card/proximity credential to the reader when accessing system
functions.
User Names - Each code may also be programmed with the user
name. You may enter up to 32 characters for the name. As needed,
refer to Appendix C for Entering User Names information.
User Prole-TheuserisalsoassignedaProle(1to99)bythe
personadministratingthesystem.Theprolenumberdetermines
the areas and functions the user can access.
Adding User Codes
1. Access the User Menu.
2. Press COMMAND until USER CODES? displays.
3. Press any Select key. The keypad displays
ADD DEL CHG BAT.
4. Select ADD or BAT (Batch) to add a new user code.
5. At the USER NUMBER: - option, enter a user number and
press COMMAND. The display changes to USER CODE: - .
Note: Do NOT program a code for user number 1 unless you intend
to use the Ambush function. See Ambush.
6. Enter a user code of 3 to 6 digits and press COMMAND. The
user enters this number to arm, disarm, etc. If using access
cards, present the card instead of entering a code. After
entering the code the keypad displays USER NUMBER ### as
the user name.
7. A 32-character name may be entered to identify the user.
Press any top row key to clear the current name. You may
then enter the new name. After entering the name press
COMMAND. See Entering Names in Appendix D.
8. The display changes to PROFILE NO: -. Select the prole
number to assign a set of authorized functions to the user
codeasoutlinedin the ProleTableonthepreviouspage.
Uptofourprolenumberscanbeassignedtoeachuser.
Note: On
All/Perimeter or Home/Sleep/Away systems use the
defaultproles1through10.ForHome/Sleep/AwaywithGuest
systemsusethedefaultproles2through9forthemainhouse
system, default proles 12-19 for the Guest 1 house system,
anddefaultproles22-29fortheGuest2housesystem.

DMP Electronics XR150 Specifications

General

Brand	DMP Electronics
Model	XR150
Category	Control Panel
Language	English