22 XR Fire Control Panel User Guide | Digital Monitoring Products, Inc.
Allows you to manually turn the system or door access relay outputs ON and OFF.
This function can individually turn your system relay and access door outputs ON
and OFF. Your system may use these outputs to control door access, interior and
exterior lighting, heating, air conditioning, or other appliances.
Outputs can be turned ON or OFF regardless of the output settings in Schedules.
Your system may be programmed to require that your user code profile have
access to areas assigned to the keypad. INVALIDAREA displays when your user
code does not have access to the keypad’s areas and the output does not turn on.
Under certain conditions, some outputs cannot be turned on. If you select a
restricted output, the keypad displays CANNOTTURNON.
1. Access the User Menu. Press COMMAND until OUTPUTSON/OFF? displays.
2. Press any Select Key to display OUTPUTSDOOR.
3. Select the type of output you want to turn ON or OFF by pressing the
Select Key under OUTPUTS or DOOR.
Outputs On/O
To Next Page
Loading...
Need help?
General
