Digital Monitoring Products, Inc. | XR Fire Control Panel User Guide 17
Silences the alarm bells or sirens during an alarm.
Using Alarm Silence does not stop an alarm report from being sent to the central
station and does not reset any alarmed devices.
Note: The keypad tone silences as soon as the first user code digit key is
pressed. You can also silence an alarm by entering your user code and
pressing COMMAND or by presenting your card to a reader while the Status
List displays. If using a proximity card, areas assigned to your card may be
disarmed and door access occurs.
1. Access the User Menu. The keypad displays ALARMSILENCE?.
2. Press any Select Key to silence the bells and exit the User Menu.
Alarm Silence
To Next Page
Loading...
