Digital Monitoring Products, Inc. | XR Fire Control Panel User Guide 39
Changing User Codes
1. Access the USER CODES? display. Press any Select Key. The keypad
displays ADD DEL CHG BAT.
2. Press the third Select Key, under CHG, to change a user code.
3. At the USER NUMBER prompt, enter the user number to change and press
COMMAND.
4. The display changes to CODENO:******. Press a Select Key and enter
the new user code. Press COMMAND.
Changing a user code does not change the user number.
5. The display then shows the current user name. Press any top row key to
clear. See Entering User Names in Working with Browsers to enter a new
name.
6. The display changes to PROFILENO. Select the profile number to assign a
set of authorized functions to the user code.
7. After entering the profile number, the keypad displays USER # CHANGED
for 5 seconds followed by USER NUMBER. This display allows you to
change another user code.
To Next Page
Loading...
Need help?
General
