DMP Electronics XR150FC - Change a Schedule

44 XR Fire Control Panel User Guide | Digital Monitoring Products, Inc.
Change a Schedule
Select CHG to edit an existing schedule.
1. Enter the schedule number 01-99 that you want to change.
2. The keypad displays ENTERSCHEDULE and the schedule name. To edit the
name press any Select Key to make changes. Press CMD to proceed.
3. The keypad displays SELECTWEEKDAY and SUNMONTUEWED. Press
the COMMAND key to display THU FRI SAT HOL.
4. Enter the Begin and End times for each day of the schedule. Refer to
Adding a Schedule for more information.
5. The keypad goes back to the SUNMONTUEWED display. Press the Back
Arrow key to enter another schedule.